Reducing valve

< Back

Reducing valve




Regulators

Area of application: Chemical industry, industrial processes, engineering and construction of industrial plants

The self-propelled regulator is a proportional actuator, operating without auxiliary energy, to reduce the pressure.
The pressure downstream of the regulator is thus regulated, the regulator closing when the downstream pressure increases.

Pressure : PN 16 to PN 100.
Nominal size : DN15 to DN 300.
Temperature : 10 ° C to 450 ° C.
Fitting : Body / Right Passage
Materials : Stainless steel.

Pilot-operated steam regulator


Field of application : Chemical industry, industrial processes, engineering and construction of industrial plants.

Operation :

The pilot-operated or externally-acting regulator operates in a slightly more complex way than the direct-acting regulator but uses the same principle of balance of forces.

Pressure : PN 16 to PN 100.
Nominal diameter : DN15 to DN 150.
Temperature : 10 ° C to 232 ° C.
Fittings : Body / Straight passage, threaded, flanges.
Materials : Stainless steel, Cast iron, GS cast iron.

The Armstrong GP2000 model stands out for its stability in the face of variations in network load and for its accuracy of ± 1% of the set point between 5% and 100% of the maximum flow.
Completely Autonomous, this model does not require any external power supply or condensate pot.
The GP2000 considerably reduces the cost and time of installation because it does not require prior intervention on the piping.

We communicate your service conditions directly from the factory so that the device is delivered with a preset corresponding to your process.

The GP2000 ARMTRONG model is a technical and economical alternative to the DP27.

Direct acting regulator GD 30 / 30S


Field of application : Laundries, hospital equipment, humidifiers, small heaters.

GD-30-30S :

The GD-30 / 30S regulator is a less bulky direct-acting regulator, which allows it a certain ease of installation on your network.
Less expensive to purchase, it finds its use on small processes and medium flow where an accuracy of + - 10% is acceptable.
Its design makes it very reliable and considerably reduces its maintenance, accessible to teams not specialized in regulation.

Pressure : PN 1 to PN 21.
Nominal diameter : DN15 to DN 50.
Temperature : up to 210 ° C.
Fittings : Body / Straight passage, threaded, flanges.
Materials : Stainless steel, Cast iron, GS cast iron.

.


For any specific requests or costing :

Consult us
Information? Assistance?
Get an answer within a minute!

Call us:
+33 5 34 26 18 65

Write to us:
contact@miditec.fr